All the parts and accessories you will need to keep your Hakko Air Pump running in prime condition.
Hakko diaphragm rebuild instructions
These replacement air filter pads are located at the top of your Hakko. They can be washed clean with just a strong spray of freshwater many times before actually needing to be replaced.
Simply remove from top cover and wash in tap water then shake out the excess water until dry. You can re use over and ov ...
Our rebuild diaphragm kits are simple to install. They include diaphragms to fix both sides. Refer to our trouble shooting section for directions on proper replacement procedure.
Tools you will need:
- 1 medium phillips screwdriver
- 1 small phillips screwdriver
- 1 medium pair of pliers
...
The magnet is the part that moves back and forth with the diaphragm. It holds the diaphragm secure and vice a versa. Typically the magnet is very long lasting. However if you run the air pump with bad diaphragms for extended periods you could wear down the magnet.
If you open the motor for repair and you find dust or small metal pa ...
The support stand is designed to allow for installation of a Hakko air pump on a wall. Built with rugged plastic construction.
Always mount your air pump above the water level of your pond or water feature. Do not rely on a one way check valve. The bottom of the air pump should be at least 2 inches above w ...